I just got my astatic pdc1 swr/power meter and need some trouble shooting. I'm running a midland 5001z with a 4' k40 4' top load and there's an 18ft coax. I used a mirror mount that's screwed in to the bed mount in my truck and the antenna is not grounded.
I had a high ratio on my first go and after some screwing around I removed the spring and got a reading of 1.4 on channel 1 and 1.9 on channel 40 but I can't move it down any further without lowering the mount. I'm wondering if someone knows how I can resolve this. I'm fairly new to cb radios so I'm not 100% sure on what I'm doing everything I've learned I've had to Google. Thanks in advance!
I had a high ratio on my first go and after some screwing around I removed the spring and got a reading of 1.4 on channel 1 and 1.9 on channel 40 but I can't move it down any further without lowering the mount. I'm wondering if someone knows how I can resolve this. I'm fairly new to cb radios so I'm not 100% sure on what I'm doing everything I've learned I've had to Google. Thanks in advance!
tuning cb radio
Aucun commentaire:
Enregistrer un commentaire